Service Areas · Placer County

Custom Cabinets in Rocklin, CA

Licensed & insured · CSLB #1041371

Two Rocklin cabinet problems come up again and again. In Whitney Ranch and the newer subdivisions, the ceilings are nine or ten feet and the cabinets stop at eight — two feet of dead air, collecting dust, above every wall. In Stanford Ranch and Sunset Whitney, the cabinets are thirty years old, the boxes are particleboard that has swollen beside the dishwasher, and half the storage is low cupboards you have to kneel to reach. Both are cabinet problems, not kitchen problems, and both are solved without touching plumbing or structure.

Filling the ceiling in the newer Rocklin homes

Standard upper cabinets are 30 or 36 inches tall. In a ten-foot Whitney Ranch great room that leaves a shelf of wasted vertical space with a soffit or nothing above it. Built to your dimensions, that becomes a stacked upper row with glass or solid doors — real storage for the things you use twice a year, and a room that reads deliberate rather than unfinished.

The same logic applies to the island. Builder islands in these homes are frequently 24 inches deep with a single cupboard, no drawers, and an overhang too shallow to sit at. Rebuilt to the room, an island holds pot drawers, a bin pull-out and a 12-inch overhang with knee clearance so it is actually used for eating rather than for dumping mail.

Replacing 1990s cabinets in Stanford Ranch

Thirty-year-old builder cabinets in Rocklin are usually particleboard carcases with a thermofoil or oak door. The doors are the visible problem; the boxes are the real one. Once the edge banding lifts and the material has taken water beside the dishwasher, refacing puts a good door on a failing box.

New boxes to the same footprint mean no plumbing moves, no permit and a job measured in days rather than weeks — but with drawers instead of low cupboards, a full-depth pull-out in the blind corner, and a pantry cabinet that is actually deep enough. That is the single most common cabinet project we do in this city, and it turns a tired kitchen into a functioning one at a fraction of a full remodel.

Pantries, laundries, garages and offices

Rocklin houses have space that no one has ever fitted out. Three projects repeat:

The garage-entry drop zone. Six to eight feet of hallway between the garage and kitchen. Full-height cabinets, a bench, hooks and closed shoe storage — a day and a half of work that changes how the family uses the house.

The laundry room. Cabinets above the machines, a counter to fold on, a tall cabinet with a pull-out hamper and a rod for hanging. Almost nobody has this and everybody wants it once they have seen it.

The garage itself. Placer County garages get hot. Plywood-carcase wall cabinets with a solid work surface survive that where plastic shelving warps.

Home offices are the newer request — a desk built into an alcove with drawer pedestals and shelving above, finished to match the kitchen so it looks like part of the house.

How we build, and why the box matters

Doors set the look: shaker, flat slab, or a raised panel where the house suits it, in painted lacquer, stained oak or walnut, or a matte laminate that ignores fingerprints. The box sets the lifespan. We use plywood carcases with soft-close full-extension runners and adjustable hinges, and we finish doors and drawer fronts in the shop rather than in your kitchen — better finish, cleaner job, shorter time in your house.

Inside, the cabinets get built for how the kitchen is actually used: deep pot drawers, cutlery and utensil dividers, a tray divider beside the oven, a pull-out for oils by the range and a bin drawer sized to the bins Rocklin collects.

Lead time, price and the free measure

Plan on four to seven weeks from approved drawings to installation. Installing a full kitchen takes two to four days; a laundry, pantry or garage run takes one to two. Cabinets are ordered before demolition on any project we run, so the lead time overlaps the rest of the work instead of adding to it.

A Rocklin kitchen's worth of custom boxes and doors typically runs $12,000 to $28,000 before counters and appliances, depending on size, door style and interior fittings. Ceiling-height runs and stacked uppers add material but rarely change the labour much. Everything starts with a free in-home measure: real dimensions, walls checked for square, then drawings and a fixed written price. See the finishes in your own room first with our free AI preview.

Neighborhoods we serve in Rocklin

Stanford RanchWhitney RanchSunset WhitneyOld Town RocklinClover ValleySpringfieldRocklin MeadowsSierra College area

We build cabinets throughout Rocklin — ceiling-height kitchen runs and rebuilt islands in Whitney Ranch and Rocklin Meadows, made-to-measure box replacements in Stanford Ranch and Sunset Whitney, and one-off pantry, laundry and garage storage across Clover Valley, Springfield and Old Town.

Reviews from Rocklin and nearby

★★★★★

Our Scandinavian white kitchen gets compliments from every guest. The crew respected our home and cleaned up daily. The photo preview made the decision easy.

Natalie J., Rocklin
★★★★★

Made in USA materials and a licensed General Contractor — that mattered to us. The luxury island kitchen is the centerpiece of the house now.

Kevin S., Rocklin
★★★★★

Beautiful two-tone kitchen. Took a little longer than quoted, but they called ahead each time. Quality is genuinely a step above the big-box stores.

Diane K., Roseville

Read all reviews →

Recent work you can price

Custom Cabinets in Rocklin — FAQ

What do custom cabinets cost in Rocklin?

A full kitchen of made-to-measure boxes and doors typically runs $12,000 to $28,000 before counters and appliances, depending on the size of the room, the door style and the interior hardware. A laundry, pantry or garage run is usually a few thousand dollars.

Can you take cabinets to a ten-foot ceiling?

Yes. In Whitney Ranch and the newer Rocklin subdivisions, a stacked upper row to the ceiling is one of the best-value changes available — it converts two feet of dust shelf into storage and makes the kitchen look finished instead of builder-standard.

Should I reface my 1990s cabinets or replace them?

If the boxes are sound plywood, refacing is reasonable. Most Stanford Ranch cabinets of that era are particleboard with swollen edges near the dishwasher, and a new door on a failing box is money spent twice. We tell you which you have at the measure.

Do new cabinets in the same layout need a permit?

No. Replacing cabinets in the same positions with no plumbing, gas or electrical changes is cosmetic work and needs no City of Rocklin permit. Adding circuits or moving a sink does.

How long will my kitchen be unusable?

For a straight cabinet replacement, two to four days of installation after a four to seven week build. We remove the old cabinets and install the new run in the same week, so the kitchen is not open for months.

Do you build for rooms other than the kitchen?

Yes — pantries, laundry rooms, garage storage, mud-room drop zones, home-office desks and media walls, in matching finishes so the rooms belong to the same house.